Home > Dell Optiplex > Error Code Lights On Dell Optiplex 745

Error Code Lights On Dell Optiplex 745

Contents

If the computer starts normally, continue to install additional memory modules (one at a time) until you have identified a faulty module or reinstalled all modules without error. Back to top #8 gorilakhan gorilakhan Topic Starter Members 6 posts OFFLINE Local time:04:16 AM Posted 02 October 2013 - 04:15 AM Hi Bory, as you say, i change Of course, only diagnostic lights 3 and 4 (out of 1, 2, 3, and 4) turn on, which the dell manual said that means: Memory modules are detected, but a memory S6 STO 3, 3 3 blinks followed by a short pause, 3 blinks, long pause, then repeats No Memory detected If customer can assist to troubleshoot, narrow down the issue by http://ajdesignsoftware.com/dell-optiplex/error-code-for-dell-optiplex-745.php

Hide thumbs Also See for OptiPlex 745c Administrator's manual - 20 pages 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Controller has failed — See Drive Problems. If none of the component failed, replace the motherboard. Got it, continue to print 2012-2016 ManualsLib.com About Us About ManualsLib Privacy Policy F.A.Q. http://www.dell.com/support/article/us/en/04/SLN284978/en

Dell Optiplex 745 Error Codes 1 2 3

Your computer's Service Tag is listed in the System Info option in system setup. If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop. The BIOS will turn the LED to this states to indicate it has started fetching op-codes. When the DELL™ logo appears, press immediately.

Check the diagnostic lights to see if the specific problem is identified (see Diagnostic Lights). If the computer malfunctions after a successful POST, the diagnostic lights do not indicate the cause of the problem. Operating system not found — Contact Dell (see Contacting Dell). Dell Optiplex 745 Troubleshooting Contact Us Back to Top

Artikel-ID: SLN284978 Datum der letzten Änderung: 09/16/2016 09:27 AM Diesen Artikel bewerten Präzise Nützlich Leicht verständlich War dieser Artikel hilfreich?

A possible system board failure has occurred. Dell Optiplex 745 Error Code 3 4 Open the case of your Dell Pc 2. If customer can assist to troubleshoot, narrow down the issue by removing one by one the memory on motherboard to determine which one failed. https://www.manualslib.com/manual/36837/Dell-Optiplex-745c.html?page=25 Anmelden 2 Wird geladen...

voyagerfan99, Oct 19, 2011 #3 lilbit13007 New Member Messages: 22 Alright, sigh. Dell Optiplex 745 Specs Schließen Ja, ich möchte sie behalten Rückgängig machen Schließen Dieses Video ist nicht verfügbar. Close some programs and try again — Close all windows and open the program that you want to use. However, I can't see anywhere, where the OP has attempted to use the F2 to get in, nor any other F key.

Dell Optiplex 745 Error Code 3 4

Kitts und Nevis St.

Wird geladen... Dell Optiplex 745 Error Codes 1 2 3 Plug the computer into a working electrical outlet and press the power button. Dell Optiplex 745 Diagnostic Lights 1 3 4 Parameters Allows you to customize the test by changing the test settings.

Ensure that the memory you are using is supported by your computer. http://ajdesignsoftware.com/dell-optiplex/error-codes-dell-optiplex-980.php A possible processor failure has occurred. Anmelden Transkript Statistik 17.705 Aufrufe 81 Dieses Video gefällt dir? If two or more memory modules are installed, remove the modules (see your service manual), then reinstall one module (see your service manual) and restart the computer. Dell Optiplex 745 Beep Codes

Nächstes Video How to Repair RAM Memory step by step Hindi - Dauer: 4:06 Computer Tips 103.036 Aufrufe 4:06 Amber orange light problem in DELL - Dauer: 28:21 Joshua Okpoti 43.618 Please reply so that we could assist you further. Wird geladen... Über YouTube Presse Urheberrecht YouTuber Werbung Entwickler +YouTube Nutzungsbedingungen Datenschutz Richtlinien und Sicherheit Feedback senden Probier mal was Neues aus! Source WARNING: Dell's Disk Monitoring System has detected that drive [0/1] on the [primary/secondary] EIDE controller is operating outside of normal specifications.

If you are seeing an unrecognisable code, one that isn't listed above - then please get in touch with your local support straight away. Dell Optiplex 745 Drivers Also, combining the configuration to validate appropriate combination. Power Button LEDs Power Button LED State Description Off Power is Off.

If it doesn't contact your technical support If it does add the memory modules back one at a time until the fault re-occurs, test that module in another slot and contact

This pattern also displays when you enter system setup (see Entering System Setup) and may not indicate a problem. Attachment failed to respond — See Drive Problems. If the computer starts normally, reinstall an additional module. Dell Optiplex 745 Manual Wird geladen...

The diagnostic lights can be either vertically or horizontally oriented. S9 MBF 3, 6 3 blinks followed by a short pause, 6 blinks, long pause, then repeats System board failure Fatal system board failure detected. Run the BIOS Recovery utility, wait for recovery completion, and then restart the computer. have a peek here Table of Contents: Diagnostic LEDs for the OptiPlex series (Prior to 2005) Diagnostic LEDs for the OptiPlex Series (2005 to 2009) Diagnostic LEDs for the OptiPlex series (2009 to 2012) Diagnostic

Sincerely, Blake. 7yearComputer Hardware + Software Technician. See the program documentation for installation instructions. Sign up! S8 MEM 3, 5 3 blinks followed by a short pause, 5 blinks, long pause, then repeats Memory configuration or incompatible error Memory subsystem configuration activity is in progress.

If the LED next to the switch illuminates, the problem may be with your system board. The computer hardware is operating normally but the BIOS may be corrupt or missing. Run Express Test first to increase the possibility of tracing the problem quickly.